|
UV GUARD Exterior Wood Finish was
developed for use as an exterior wood
finish for log homes and quality wood
siding. It is also very effective when
used as a coating on fences, shingles,
and other vertical surfaces. UV GUARD
Exterior Wood Finish is also safe to use
on interior wood surfaces and is
especially good for areas that receive
extra amounts of sunlight.
NOTE:
We do not recommend that Clear UV GUARD
be used as the only exterior coating.
While UV GUARD Clear will add greater
longevity and protection to exterior
wood surfaces, pigmented exterior
finishes will provide even greater
protection. In addition to the UV
absorbers and stabilizers, the pigment
particles
themselves help to block the rays of the
sun. Clear UV GUARD should be applied
only as the "finish coat" after at least
two (2) coats of stain have been
applied. Clear UV GUARD may also be used
as a "maintenance coat" to brighten and
reseal a previous finish. |
|
 |
Penetrates and seals the wood
surface enriching the appearance
of the natural wood and at the
same time shielding and
protecting the wood with a
superior, longer lasting,
weather-resistant finish. |
|
|
Odorless when dry. |
|
|
Nonflammable when wet and
increases kindling
temperature/time of wood when
dry. |
|
|
Easily applied by brush or
airless sprayer. |
|
|
Repels moisture while allowing
the wood to breathe naturally. |
|
|
Provides excellent adhesive
surface for chinking and
virtually eliminates all
debonding problems that are
likely to occur by using other
popular finishes. |
|
|
Manufactured in non-yellowing
clear and beautifully natural
semi-transparent
colors. |
|
